Tips For Fixing Plumbing Problems By Yourself

If you are completely new to the world of plumbing, then you are probably thinking that some tips on plumbing will help you immensely so that you can begin maintaining your own at home. Listed below are some tips to get you started with your home plumbing maintenance and repair.



If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.

If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.

There are many ways to unclog a drain. You can try plunging it at first. If related internet page doesn't work try using a chemical agent from the store. Before you go and spend money at the store though, if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.

If water is not coming to the dishwasher, you most likely have a blockage somewhere. You will need to turn off the water supply and remove the hose that leads to the dishwasher. After securing the hose, turn the water back on. See if it feeds into a bowl. If not, then you must find the block where it is at which may include removing more piping.

If you have problems with a slow drain, there are easier things you can do other than removing the pipes to clean it. There are certain tools made just for this purpose that you insert into the drain to loosen the clog so it washes away or grab it and remove it completely.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

You can use two different methods to remove clean out plugs. One way is to make the fitting looser with a hammer and chisel. You can also chisel into the plug.

A plumbing snake is an essential tool in any homeowner's tool box. Snakes can be used to unclog kitchen and bathrooms drains and toilets when clogged with hardened debris. They are useful as well for grabbing hold of items dropped down sink drains. Snakes come in a variety of sizes for home use and heavier-duty models can often be rented for bigger jobs.

When you have to take out the clean out plug, but it is not coming out, you can remove it using one of two ways. One way is to make the fitting looser with a hammer and chisel. Your other option to try is to chisel through the out plug.

If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.

website is a general rule of thumb that you should replace a water faucet every seven years, even if you do not see anything wrong with it. Some faucet problems are not visible to the naked eye, which is why it is so important for them to replaced every so often.

Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing's changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.

If you are the kind of person who travels a great deal, then remember that different countries may have very different kinds of plumbing systems available. If you are not sure of how things work in the region where you experience problems, then you should either do research or avoid fixing the problem yourself.

Governmental regulations sometimes prevent plumbers from actively providing maintenance to copper piping. If you have a calcium buildup in your copper piping, you are going to need to take care of this yourself. You have to get rid of all the water and add vinegar which eats away the calcium buildup out of copper pipes.

If attempting a plumbing repair yourself, be sure and have plenty of buckets on hand to catch spilling water. While you may have turned off the water supply, there is always some water left in the pipes and the larger the home and more extensive the plumbing system, the more water you may encounter.


As you can see, maintaining and repairing your own plumbing isn't as difficult as it may appear at first glance. It just requires doing research, getting documents in order and asking a lot of questions. The work will pay off once you see how it can help save you money.

Leave a Reply

Your email address will not be published. Required fields are marked *